PVC Edge Banding

● Look at the hue and surface roughness of the edge banding. The color of the surface of a good edge banding is also very important. Whether the color is close to the customized product and gorgeous. If the surface is very rough and there are scratches, the quality will not be much better. This is the surface quality of the edge banding. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge band is: the surface must be smooth, no or very little blistering, no or very little graining, moderate gloss, not too bright or too matte (unless there are special requirements).

● Look at the flatness of the surface and bottom surface of the edge banding, whether the thickness is uniform, otherwise it will cause the joint of the edge banding and the plate, the glue line is too conspicuous or the gap between the plate and the edge banding is too large to affect the overall beauty. Details determine success or failure, and often a small detail problem may bring about an embarrassing situation where the overall effect is not good.

● Whether the edge trimming is whitish, whether the surface of the bending edge banding is seriously whitish, and whether the edge trimming background color of the edge banding is close to the surface color of the board. PVC edge banding is mainly made of PVC and calcium carbonate plus additives. If the content of calcium carbonate is too high, the phenomenon of edge banding and bending will appear, which proves that the quality of this kind of product is not good.

● Whether the strength is OK and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is also better. If the strength is too high, it also means that the processing difficulty is increased. Low elasticity means low wear resistance and low anti-aging ability. In addition, according to the needs of actual production, it is generally necessary to manually trim the edges, and soft points can be appropriately made, and automatic edge banding machines can be appropriately made hard points.

● Whether the adhesive is evenly applied, and whether it is easy to fall off during use.

● Smell whether the PVC edge banding has any smell. Products produced with good quality raw materials generally have little taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.

The first step in maintaining your PVC edgebanding is to keep it clean. PVC edgebanding is moisture resistant and easy to clean, but it should be cleaned regularly to remove dust and dirt. Use a damp cloth or mild detergent to wipe the surface of the edgebanding. Avoid using abrasive materials, as they can scratch the surface of the edgebanding.

The second step in maintaining your PVC edgebanding is to protect it from heat. PVC edgebanding is heat resistant, but prolonged exposure to heat can cause it to warp or fade. To protect your PVC edgebanding from heat, avoid placing hot items directly on it and keep it away from heat sources such as ovens and stoves.

The third step in maintaining your PVC edgebanding is to protect it from chemicals. PVC edgebanding is resistant to most chemicals, but it can be damaged by some chemicals, such as solvents and harsh cleaning products. To protect your PVC edgebanding from chemicals, avoid using harsh cleaning products and solvents on it, and always test any product on a small, inconspicuous area before using it on the edgebanding.

The fourth step in caring for your PVC edgebanding is to protect it from impacts. PVC edgebanding is durable, but it can be damaged by impacts. To protect your PVC edgebanding from impacts, avoid placing heavy objects on it and use furniture pads or coasters to protect it from scratches and dents.

The fifth step in caring for your PVC edgebanding is to repair damaged edgebanding. PVC edgebanding is durable, but it can be damaged over time. If your PVC edgebanding is damaged, it is important to repair it as soon as possible to prevent further damage. You can use a touch-up pen to repair small damage, such as scratches and nicks. Larger damage, such as cracks or warping, may require the services of a professional