A Brief Discussion On The Maintenance Of Edge Banding

1, Do not forcefully drag or pull during transportation, handle with care; When placing, it should be placed flat and stable. If the ground is uneven, the legs should be padded to prevent damage to the mortise and tenon structure;
2, Do not expose furniture edge banding to sunlight, and avoid placing it in excessively dry areas. Although edge banding has a higher sun resistance than ordinary edge banding, it is still better to use sunscreen. Excessive exposure to sunlight can cause the edge banding to discolor and deform.
3, Do not place furniture in very damp places. No matter how well your furniture is sealed, it is impossible to completely prevent moisture. If the moisture prevention work is not done well, the wood will expand when wet, easily rot over time, and drawers will not open;
4, Do not place heavy objects on top of the edge banding of office furniture such as coats and cabinets to prevent the cabinet door from protruding and not closing tightly; Clothes should also not be stacked too much and should not exceed the cabinet door to prevent deformation of the cabinet door;
5, Do not rinse or wipe the edge banding of office furniture made of plywood with water or a cloth. Do not soak it in alkaline water to prevent the plywood from spreading or coming off;
6, Do not mix paint with putty that is different in color from the original paint of the furniture edge banding, and then embed it into the cracks of the furniture edge banding to block them flat, in order to avoid leaving scars;
7, Do not use alkaline water or boiling water to wash the edge banding of office furniture or place high concentrations of alcohol, banana oil, and boiling water on the tabletop to prevent damage to the paint surface of the furniture edge banding.