How To Determine The Quality Of Furniture Through Edge Banding

The integrity of the edge banding directly affects the environmental friendliness of panel furniture, so the edge banding process has become a major selling point for many businesses selling panel furniture. In addition to the exquisite edge banding technique, the quality of the edge banding material is also directly related to the environmental friendliness of panel furniture products. Therefore, edge banding is also one of the objects inspected by the quality supervision department. Let's learn together how to check the edge banding of panel furniture.
To check the flatness of the edge banding of panel furniture, a flat blade can be used to horizontally clamp the edge banding to see if it is a straight line. If it is not a straight line, thick adhesive lines may appear on both sides of the edge banding.
Next, it is necessary to check whether the surface of the edge banding is smooth and free of impurities. If there are impurities or fine needle holes on the edge banding of furniture, it may be made from recycled materials.
Next, we need to check if the side of the panel furniture is even. If there are jagged edges, it may be caused by the following reasons: on the one hand, the trimming knife is not sharp enough; On the other hand, the edge banding contains too much calcium carbonate.
Finally, we can use nails or other tools to draw a line on the edge banding of panel furniture. If there is any damage, the surface wear resistance and hardness of the edge banding do not meet the standards, so the quality of the edge banding is naturally unqualified.
If the back of the edge banding of panel furniture is very flat and there are still thick adhesive lines after edge banding, then we need to inspect the panel, check the hot melt adhesive, check the edge banding machine, and use a small section of edge banding; For the edge banding used in panel furniture, the main types are PVC wood grain edge banding, ABS edge banding, and acrylic edge banding. Due to the different characteristics of each edge banding, furniture manufacturers will also choose the appropriate edge banding according to the grade of furniture they produce.